ethernet-switch-profile (ACX Series)
Syntax ethernet-switch-profile {
tag-protocol-id [ tpids ];
}
Hierarchy Level [edit interfaces interface-name gigether-options]
Release Information Statement introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Description Configure VLAN tag and MAC address accounting and filtering properties. For information
about disabling MAC learning for a bridge domain, see the MX Series Layer 2 Configuration
Guide.
The remaining statements are explained separately. See CLI Explorer.
Default If the ethernet-switch-profile statement is not configured, Gigabit Ethernet PICs with
SFPs (except the 10-port Gigabit Ethernet PIC) behave like Gigabit Ethernet interfaces.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Configuring MAC Address Filtering
• Stacking and Rewriting Gigabit Ethernet VLAN Tags Overview
Copyright © 2017, Juniper Networks, Inc.1506
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
