show route receive-protocol
List of Syntax Syntax on page 3106
Syntax (EX Series Switches) on page 3106
Syntax show route receive-protocol protocol neighbor-address
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)
Syntax (EX Series
Switches)
show route receive-protocol protocol neighbor-address
<brief | detail | extensive | terse>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description Display the routing information as it was received through a particular neighbor using a
particular dynamic routing protocol.
Options brief | detail | extensive | terse—(Optional) Display the specified level of output.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
protocol neighbor-address—Protocol transmitting the route (bgp, dvmrp, msdp, pim, rip,
or ripng) and address of the neighboring router from which the route entry was
received.
Additional Information The output displays the selected routes and the attributes with which they were received,
but does not show the effects of import policy on the routing attributes.
Required Privilege
Level
view
List of Sample Output show route receive-protocol bgp on page 3109
show route receive-protocol bgp extensive on page 3109
show route receive-protocol bgp table extensive on page 3109
show route receive-protocol bgp logical-system extensive on page 3110
show route receive-protocol bgp detail (Layer 2 VPN) on page 3111
show route receive-protocol bgp extensive (Layer 2 VPN) on page 3111
show route receive-protocol bgp (Layer 3 VPN) on page 3112
show route receive-protocol bgp detail (Layer 3 VPN) on page 3112
show route receive-protocol bgp detail (Long-Lived Graceful Restart) on page 3113
show route receive-protocol bgp detail (Labeled Unicast) on page 3113
show route receive-protocol bgp extensive (Layer 3 VPN) on page 3114
Output Fields Table 225 on page 3107 describes the output fields for the show route receive-protocol
command. Output fields are listed in the approximate order in which they appear.
Copyright © 2017, Juniper Networks, Inc.3106
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
