show igmp snooping membership
Syntax show igmp snooping membership
<brief | detail>
<bridge-domain bridge-domain-name>
<group group-name>
<logical-system logical-system-name>
<virtual-switch virtual-switch-name>
<vlan-id vlan-identifier>
Release Information Command introduced in Junos OS Release 8.5.
Description Display IGMP snooping membership information.
Options none—Display detailed information.
brief | detail—(Optional) Display the specified level of output.
bridge-domain bridge-domain-name—(Optional) Display information about a particular
bridge domain.
group group-name —(Optional) Display information about this group address.
logical-system logical-system-name—(Optional) Display information about a particular
logical system, or type ’all’.
virtual-switch virtual-switch-name—(Optional) Display information about a particular
virtual switch.
vlan-id vlan-identifier—(Optional) Display information about a particular VLAN.
Required Privilege
Level
view
Related
Documentation
show igmp snooping interface on page 2754•
• show igmp snooping statistics on page 2763
• clear igmp snooping membership
List of Sample Output show igmp snooping membership on page 2760
show igmp snooping membership (Exclude Mode) on page 2761
show igmp snooping membership interface ge-0/1/2.200 on page 2761
show igmp snooping membership vlan-id 1 on page 2761
Output Fields Table 176 on page 2760 lists the output fields for the show igmp snooping membership
command. Output fields are listed in the approximate order in which they appear.
2759Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
