show l2-learning global-information
Syntax show l2-learning global-information
Release Information Command introduced in Junos OS Release 8.4.
Description (MX Series routers only) Display Layer 2 learning process-related information for the
entire router.
Options This command has no options.
Required Privilege
Level
view
List of Sample Output show l2-learning global-information on page 2714
Output Fields Table 163 on page 2714 describes the output fields for the show l2-learning
global-information command. Output fields are listed in the approximate order in which
they appear.
Table 163: show l2-learning global-information Output Fields
Field DescriptionField Name
Configured timeout interval, in seconds, for all MAC table entries.MAC aging
interval
Status of MAC learning: Enabled or Disabled.MAC learning
Status of MAC accounting: Enabled or Disabled.MAC statistics
Configured maximum limit on the number of MAC addresses that can be
learned.
MAC limit Count
Status of the learned MAC limit hit flag: Enabled (the learned MAC exceeds
the global MAC limit) or Disabled (the learned MAC does not exceed the
global MAC limit).
MAC limit hit flag
Status of action to drop packets after the configured MAC address limit is
reached: Enabled (packets are dropped) or Disabled (packets are forwarded).
MAC packet
action drop
Sample Output
show l2-learning global-information
user@host> show l2-learning global-information
Global Configuration:
MAC aging interval : 300
MAC learning : Enabled
Copyright © 2017, Juniper Networks, Inc.2714
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
