show protection-group ethernet-ring statistics
Syntax show protection-group ethernet-ring statistics group-name group-name
<brief | detail>
Release Information Command introduced in Junos OS Release 9.4.
Command introduced in Junos OS Release 12.1 for EX Series switches.
Command introduced in Junos OS Release 12.3X54 for ACX Series routers.
Description Display statistics regarding Automatic Protection Switching (APS) protection groups on
an Ethernet ring.
Options group-name—Display statistics for the protection group. If you omit this option, protection
group statistics for all configured groups are displayed.
brief—Display brief statistics for the protection group.
detail—Display detailed statistics for the protection group.
Required Privilege
Level
view
Related
Documentation
show protection-group ethernet-ring data-channel•
• show protection-group ethernet-ring aps on page 2916
• show protection-group ethernet-ring node-state on page 2923
• show protection-group ethernet-ring interface on page 2920
• show protection-group ethernet-ring vlan on page 2932
List of Sample Output show protection-group ethernet-ring statistics (EX Series Switch) on page 2929
show protection-group ethernet-ring statistics (MX Series Router) on page 2929
show protection-group ethernet-ring statistics detail (Specific Group)(MX Series
Router) on page 2930
show protection-group ethernet-ring statistics (Owner Node, Failure Condition on
ACX and MX Router) on page 2930
show protection-group ethernet-ring statisitics (Ring Node, Failure Condition on ACX
and MX Router) on page 2931
Output Fields Table 205 on page 2928 lists the output fields for the show protection-group ethernet-ring
statistics command.
2927Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands