media-type (Dual-Purpose Uplink Ports)
Syntax media-type (copper | fiber);
Hierarchy Level [edit interfaces interface-name]
Release Information Statement introduced in Junos OS Release 11.3 for EX Series switches.
Statement introduced in Junos OS Release 12.2 for ACX1000 Universal Access Routers.
Description (EX2200-C switch only) Configure the media type for a dual-purpose uplink port (one
RJ-45 port and one SFP port) on an EX2200 switch. If you use the media-type for a
dual-purpose uplink port, the alternate media type cannot be used with the port.
(ACX1000 routers only) Select the media type (copper or fiber) for the 1-Gigabit Ethernet
interfaces.
Default When media-type is not set, the port accepts either type of connection. The media type
is fiber if a transceiver is installed in the SFP connection. If no transceiver is installed, the
media type is fiber.
Options copper—The dual-purpose uplink port accepts only a 10/100/1000BASE-T copper
connection.
fiber—The dual-purpose uplink port accepts only an SFP fiber connection.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Configuring the Media Type on Dual-Purpose Uplink Ports (CLI Procedure)
1611Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
