Juniper ACX2000 Configuration Guide

query-response-interval seconds;
robust-count number;
vlan vlan-id {
immediate-leave;
interface interface-name {
group-limit limit;
host-only-interface;
immediate-leave;
multicast-router-interface;
static {
group ip-address {
source ip-address;
}
}
}
proxy {
source-address ip-address;
}
query-interval seconds;
query-last-member-interval seconds;
query-response-interval seconds;
robust-count number;
}
}
You can include this statement at the following hierarchy levels:
•
[edit bridge-domains bridge-domain-name protocols]
•
[edit routing-instances routing-instance-name bridge-domains bridge-domain-name
protocols]
By default, IGMP snooping is not enabled. Statements configured at the VLAN level apply
only to that particular VLAN.
Related
Documentation
Multicast Overview•
• Understanding Multicast Snooping
Configuring VLAN-Specific IGMP Snooping Parameters
All of the IGMP snooping statements configured with the igmp-snooping statement, with
the exception of the traceoptions statement, can be qualified with the same statement
at the VLAN level. To configure IGMP snooping parameters at the VLAN level, include
the vlan statement:
vlan vlan-id;
immediate-leave;
interface interface-name {
group-limit limit;
host-only-interface;
multicast-router-interface;
static {
group ip-address {
Copyright © 2017, Juniper Networks, Inc.478
ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English