Juniper ACX2000

partition
Syntax partition partition-number interface-type type timeslots timeslots;
partition partition-number timeslots timeslots interface-type type;
Hierarchy Level [edit interfaces interface-name]
Release Information Statement introduced in Junos OS Release 12.3 for ACX Series Routers.
Description Configure the channelized interface (ct) partition. The partition number is correlated with
the channel number. Partition and channel numbering on channelized interfaces begins
with :1, not :0.
Default If you omit this statement, the channelized PIC is not partitioned, and no data channels
are configured.
Options partition-number—Sublevel interface partition index.
Range:
• 1 through 30 on a channelized E1 interface.
• 1 through 24 on a channelized T1 interface.
• 0 through 31 (with 0 reserved for framing) for NxDS0 interfaces on channelized E1 or
T1 interfaces.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Channelized E1 IQ and IQE Interfaces Overview
• Channelized OC12/STM4 IQ and IQE Interfaces Overview
• Configuring Channelized T3 IQ Interfaces
• no-partition
passive (Routing Options)
See active
Copyright © 2017, Juniper Networks, Inc.1654
ACX Series Universal Access Router Configuration Guide