show interfaces (Aggregated Ethernet)
Syntax show interfaces aenumber
<brief | detail | extensive | terse>
<descriptions>
<media>
<snmp-index snmp-index>
<statistics>
Release Information Command introduced before Junos OS Release 7.4.
Description (M Series, T Series, and MX Series routers only) Display status information about the
specified aggregated Fast Ethernet or Gigabit Ethernet interface.
Options aenumber—Display standard information about the specified aggregated Fast Ethernet
or Gigabit Ethernet interface.
brief | detail | extensive | terse—(Optional) Display the specified level of output.
descriptions—(Optional) Display interface description strings.
media—(Optional) Display media-specific information.
snmp-index snmp-index—(Optional) Display information for the specified SNMP index
of the interface.
statistics—(Optional) Display static interface statistics.
Required Privilege
Level
view
Related
Documentation
Ethernet Interfaces Feature Guide for Routing Devices•
List of Sample Output show interfaces (Aggregated Ethernet) on page 2671
show interfaces brief (Aggregated Ethernet) on page 2672
show interfaces detail (Aggregated Ethernet) on page 2672
show interfaces extensive (Aggregated Ethernet) on page 2673
show interfaces extensive (Aggregated Ethernet with VLAN Stacking) on page 2674
Output Fields Table 155 on page 2666 lists the output fields for the showinterfaces (Aggregated Ethernet)
command. Output fields are listed in the approximate order in which they appear.
Table 155: Aggregated Ethernet show interfaces Output Fields
Level of OutputField DescriptionField Name
Physical Interface
All levelsName of the physical interface and state of the interface.Physical interface
Copyright © 2017, Juniper Networks, Inc.2666
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
