show route detail
List of Syntax Syntax on page 3000
Syntax (EX Series Switches) on page 3000
Syntax show route detail
<destination-prefix>
<logical-system (all | logical-system-name)>
Syntax (EX Series
Switches)
show route detail
<destination-prefix>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 13.2X51-D15 for the QFX Series.
Comand introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Description Display detailed information about the active entries in the routing tables.
Options none—Display all active entries in the routing table on all systems.
destination-prefix—(Optional) Display active entries for the specified address or range
of addresses.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
Required Privilege
Level
view
List of Sample Output show route detail on page 3011
show route detail (with BGP Multipath) on page 3017
show route label detail (Multipoint LDP Inband Signaling for Point-to-Multipoint
LSPs) on page 3018
show route label detail (Multipoint LDP with Multicast-Only Fast Reroute) on page 3018
Output Fields Table 216 on page 3000 describes the output fields for the show route detail command.
Output fields are listed in the approximate order in which they appear.
Table 216: show route detail Output Fields
Field DescriptionField Name
Name of the routing table (for example, inet.0).routing-table-name
Number of destinations for which there are routes in the routing table.number destinations
Copyright © 2017, Juniper Networks, Inc.3000
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
