atm-policer (Firewall)
Syntax atm-policer policer-name {
atm-service (cbr | nrtvbr | rtvbr | ubr);
cdvt cdvt;
logical-interface-policer;
max-burst-size max-burst-size;
peak-rate peak-rate;
policing-action (discard | discard-tag | count);
sustained-rate sustained-rate;
}
Hierarchy Level [edit firewall],
[edit interface at-fpc/pic/port unit unit-number]
Release Information Statement introduced in Junos OS Release 12.2 on ACX Series routers.
Description (ACX Series routers) Create a policer, which polices each cell in the ATM packet. A policer
defines the maximum amount of traffic that can flow through an interface and further
determines the actions to be taken when the traffic exceeds the defined limits.
When included at the [edit firewall] hierarchy level, the atm-policer statement creates
a policer that can be applied explicitly to multiple ATM IMA interfaces at the edit interface]
hierarchy level.
Options policer-name—ATM policer name. The name can contain letters, numbers, and hyphens
(-), and can be up to 255 characters long. To include spaces in the name, enclose it
in quotation marks (“ ”).
The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Understanding CoS on ATM IMA Pseudowire Interfaces Overview on page 895
• Configuring Policing on an ATM IMA Pseudowire on page 912
Copyright © 2017, Juniper Networks, Inc.1438
ACX Series Universal Access Router Configuration Guide