export (Routing Options)
Syntax export [ policy-name ];
Hierarchy Level [edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options forwarding-table],
[edit logical-systems logical-system-name routing-options forwarding-table],
[edit routing-instances routing-instance-name routing-options forwarding-table],
[edit routing-options forwarding-table]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 11.3 for the QFX Series.
Statement introduced in Junos OS Release 12.3 for ACX Series routers.
Statement introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Description Apply one or more policies to routes being exported from the routing table into the
forwarding table.
In the export statement, list the name of the routing policy to be evaluated when routes
are being exported from the routing table into the forwarding table. Only active routes
are exported from the routing table.
You can reference the same routing policy one or more times in the same or a different
export statement.
You can apply export policies to routes being exported from the routing table into the
forwarding table for the following features:
• Per-packet load balancing
• Class of service (CoS)
Options policy-name—Name of one or more policies.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Example: Load Balancing BGP Traffic
1513Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
