show interfaces statistics
Syntax show interfaces statistics interface-name
<satellite-device [device-alias-name |all ]>
<detail>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 12.1X48 for PTX Series Packet Transport
Routers.
Command introduced in Junos OS Release 12.2 for ACX Series Routers.
satellite-device option introduced in Junos OS Release 14.2R3.
Description Display static interface statistics, such as errors.
NOTE: When the show interfaces statistics command is executed on an
interface that is configured on T4000 Type 5 FPC, the IPv6 transit statistics
field displays:
• Total statistics (sum of transit and local statistics) at the physical interface
level
• Transit statistics at the logical interface level
Options interface-name—Name of an interface.
satellite-device [device-alias-name | all ]—(Junos Fusion only) (Optional) Display
interface statistics for interfaces on the specified satellite device in the Junos Fusion,
or on all satellite devices in the Junos Fusion.
NOTE: In a Junos Fusion Enterprise, logical interface statistics are not
synced across aggregation devices in a dual-aggregation device topology.
detail—(Optional) Display detailed output.
Required Privilege
Level
view
Related
Documentation
clear interfaces statistics•
List of Sample Output show interfaces statistics (Fast Ethernet) on page 2532
show interfaces statistics (Gigabit Ethernet PIC—Egress) on page 2533
2531Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
