EasyManuals Logo

Juniper ACX2000 Configuration Guide

Juniper ACX2000
3270 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2590 background imageLoading...
Page #2590 background image
show interfaces statistics detail (Aggregated Ethernet) on page 2534
show interfaces statistics detail (Aggregated Ethernet—Ingress) on page 2536
show interfaces statistics detail (Aggregated Ethernet—Egress) on page 2537
show interfaces statistics (SONET/SDH) on page 2538
show interfaces statistics (Aggregated SONET/SDH—Ingress) on page 2539
show interfaces statistics (Aggregated SONET/SDH—Egress) on page 2540
show interfaces statistics (MX Series Routers) on page 2541
show interfaces statistics (PTX Series Packet Transport Routers) on page 2542
show interfaces statistics (ACX Series routers) on page 2542
Output Fields Output from both the show interfaces interface-name detail and the show interfaces
interface-name extensive commands include all the information displayed in the output
from the show interfaces statistics command. For more information, see the particular
interface type in which you are interested. For information about destination class and
source class statistics, see the “Destination Class Field” section and the “Source Class
Field” section under Common Output Fields Description. For information about the input
errors and output errors, see Fast Ethernet and Gigabit Ethernet Counters.
Sample Output
show interfaces statistics (Fast Ethernet)
user@host> show interfaces fe-1/3/1 statistics
Physical interface: fe-1/3/1, Enabled, Physical link is Up
Interface index: 144, SNMP ifIndex: 1042
Description: ford fe-1/3/1
Link-level type: Ethernet, MTU: 1514, Speed: 100mbps, Loopback: Disabled,
Source filtering: Disabled, Flow control: Enabled
Device flags : Present Running
Interface flags: SNMP-Traps Internal: 0x4000
CoS queues : 4 supported, 4 maximum usable queues
Current address: 00:00:5E:00:53:dc, Hardware address: 00:00:5E:00:53:dc
Last flapped : 2006-04-18 03:08:59 PDT (00:01:24 ago)
Statistics last cleared: Never
Input rate : 0 bps (0 pps)
Output rate : 0 bps (0 pps)
Input errors: 0, Output errors: 0
Active alarms : None
Active defects : None
Logical interface fe-1/3/1.0 (Index 69) (SNMP ifIndex 50)
Flags: SNMP-Traps Encapsulation: ENET2
Protocol inet, MTU: 1500
Flags: Is-Primary, DCU, SCU-in
Packets Bytes
Destination class (packet-per-second) (bits-per-second)
silver1 0 0
( 0) ( 0)
silver2 0 0
( 0) ( 0)
silver3 0 0
( 0) ( 0)
Addresses, Flags: Is-Default Is-Preferred Is-Primary
Destination: 10.27.245/24, Local: 10.27.245.2,
Broadcast: 10.27.245.255
Protocol iso, MTU: 1497
Flags: Is-Primary
Copyright © 2017, Juniper Networks, Inc.2532
ACX Series Universal Access Router Configuration Guide

Table of Contents

Other manuals for Juniper ACX2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper ACX2000 and is the answer not in the manual?

Juniper ACX2000 Specifications

General IconGeneral
BrandJuniper
ModelACX2000
CategoryNetwork Router
LanguageEnglish

Related product manuals