show route no-community
List of Syntax Syntax on page 3085
Syntax (EX Series Switches) on page 3085
Syntax show route no-community
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
Syntax (EX Series
Switches)
show route no-community
<brief | detail | extensive | terse>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description Display the route entries in each routing table that are not associated with any community.
Options none—(Same as brief) Display the route entries in each routing table that are not
associated with any community.
brief | detail | extensive | terse—(Optional) Display the specified level of output.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
Required Privilege
Level
view
List of Sample Output show route no-community on page 3085
show route no-community detail on page 3086
show route no-community extensive on page 3086
show route no-community terse on page 3087
Output Fields For information about output fields, see the output field tables for the show route
command, the show route detail command, the show route extensive command, or
the show route terse command.
Sample Output
show route no-community
user@host> show route no-community
inet.0: 28 destinations, 30 routes (27 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
10.10.0.0/16 *[Static/5] 00:36:27
> to 192.168.71.254 via fxp0.0
10.209.0.0/16 *[Static/5] 00:36:27
> to 192.168.71.254 via fxp0.0
10.255.71.52/32 *[Direct/0] 00:36:27
3085Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
