EasyManuals Logo

Juniper ACX2000 Configuration Guide

Juniper ACX2000
3270 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1308 background imageLoading...
Page #1308 background image
If you do not specify an encapsulation type for the VPLS routing instance or the VPLS
neighbor, ethernet is used.
To specify an encapsulation type for the VPLS routing instance, include the
encapsulation-type statement:
encapsulation-type (ethernet | ethernet-vlan);
You can include this statement at the following hierarchy levels:
•
[edit routing-instances routing-instance-name protocols vpls]
•
[edit logical-systems logical-system-name routing-instances routing-instance-name
protocols vpls]
You can also specify an encapsulation type for a specific VPLS neighbor by including the
encapsulation-type statement at the following hierarchy levels:
•
[edit routing-instances routing-instance-name protocols vpls neighbor address]
•
[edit logical-systems logical-system-name routing-instances routing-instance-name
protocols vpls neighbor address]
Configuring the MPLS Routing Table to Leak Routes a Nondefault Routing Instance
Starting in Junos OS Release 16.1, you can specify one or more nondefault routing instances
where you want MPLS routes to be leaked from the mpls.0 path routing table in the
master routing instance. This capability is useful in an L2VPN/VPLS configuration when
the remote PE router is learned from the IGP in a nondefault routing instance, because
L2VPN/VPLS installs ingress-labeled routes only in the master mpls.0 table.
By default, routes in the mpls.0 routing table in the master routing instance are not leaked
to the corresponding routing tables in nondefault routing instances. When L2VPN/VPLS
traffic is received on the core-facing interface in a nondefault routing instance, the router
performs a lookup in the table that corresponds to that interface,
routing-instance-name.mpls.0. Because the routes are not leaked by default, then no
routes are found in the routing-instance-name.mpls.0 routing table and all the incoming
traffic is dropped.
To leak MPLS routes to a nondefault routing instance, include the import-labeled-routes
statement and specify one or more routing instances where the routes need to be leaked:
import-labeled-routes [ routing-instance-name ];
You can include this statement at the following hierarchy levels:
•
[edit routing-instances routing-instance-name protocols vpls]
•
[edit logical-systems logical-system-name routing-instances routing-instance-name
protocols vpls]
Copyright © 2017, Juniper Networks, Inc.1250
ACX Series Universal Access Router Configuration Guide

Table of Contents

Other manuals for Juniper ACX2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper ACX2000 and is the answer not in the manual?

Juniper ACX2000 Specifications

General IconGeneral
BrandJuniper
ModelACX2000
CategoryNetwork Router
LanguageEnglish

Related product manuals