multilink-max-classes
Syntax multilink-max-classes number;
Hierarchy Level [edit interfaces interface-name unit logical-unit-number],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]
Release Information Statement introduced before Junos OS Release 7.4.
Description For link services IQ (lsq) interfaces only, configure the number of multilink classes to be
negotiated when a link joins the bundle.
Options number—The number of multilink classes to be negotiated when a link joins the bundle.
Range: 1 through 8
Default: None
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Configuring Multiclass MLPPP on LSQ Interfaces on page 518
1629Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements