Displaying ETH-SLM Statistics Only
Purpose Display on-demand ETH-SLM statistics.
By default, the show oam ethernet connectivity-fault-management synthetic-loss-statistics
command displays on-demand ETH-SLM statistics for MEPs in the specified CFM
maintenance association within the specified CFM maintenance domain.
Action To display the on-demand ETH-SLM statistics collected for MEPs belonging to
maintenance association ma1 within maintenance domain md1:
•
user@host> show oam ethernet connectivity-fault-management synthetic-loss-statistics
maintenance-domain md1 maintenance-association ma1
• To display the on-demand ETH-SLM statistics collected for ETH-SLM sessions for the
local MEP 201 belonging to maintenance association ma2 within maintenance
domain md2:
user@host> show oam ethernet connectivity-fault-management synthetic-loss-statistics
maintenance-domain md2 maintenance-association ma2 local-mep 201
• To display the on-demand ETH-SLM statistics collected for ETH-SLM sessions from
local MEPs belonging to maintenance association ma3 within maintenance domain md3
to the remote MEP 302:
user@host> show oam ethernet connectivity-fault-management synthetic-loss-statistics
maintenance-domain md3 maintenance-association ma3 remote-mep 302
Meaning The output displays on-demand ETH-SLM statistics for MEPs in the specified maintenance
association within the specified maintenance domain. For details about the output of
this command and the descriptions of the output fields, see show oam ethernet
connectivity-fault-management synthetic-loss-statistics.
Displaying ETH-SLM Statistics and Frame Counts
Purpose Display on-demand ETH-SLM statistics and ETH-SLM frame counts.
By default, the show oam ethernet connectivity-fault-management mep-statistics
command displays on-demand ETH-SLM statistics and frame counts for MEPs in the
specified CFM maintenance association within the specified CFM maintenance domain.
Action To display the on-demand ETH-SLM statistics and ETH-SLM frame counts for MEPs
in maintenance association ma1 within maintenance domain md1:
•
user@host> show oam ethernet connectivity-fault-management mep-statistics
maintenance-domain md1 maintenance-association ma1
1149Copyright © 2017, Juniper Networks, Inc.
Chapter 34: Configuring Operations, Administration, and Management (OAM)
To Next Page
Loading...
Need help?
General
