show chassis craft-interface
List of Syntax Syntax on page 1865
Syntax (MX Series Routers) on page 1865
Syntax (MX104, MX2010, MX2020, and MX2008 3D Universal Edge Routers) on page 1865
Syntax (TX Matrix Routers) on page 1865
Syntax (TX Matrix Plus Routers) on page 1865
Syntax (ACX Series Universal Access Routers) on page 1865
Syntax show chassis craft-interface
Syntax (MX Series
Routers)
show chassis craft-interface
<all-members>
<local>
<member member-id>
Syntax (MX104,
MX2010,MX2020, and
show chassis craft-interface
MX2008 3D Universal
Edge Routers)
Syntax (TX Matrix
Routers)
show chassis craft-interface
<lcc number | scc>
Syntax (TX Matrix Plus
Routers)
show chassis craft-interface
<lcc number | sfc number>
Syntax (ACX Series
Universal Access
Routers)
show chassis craft-interface
Release Information Command introduced before Junos OS Release 7.4.
sfc option for the TX Matrix Plus router introduced in Junos OS Release 9.6.
Command introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Command introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.
Command introduced in Junos OS Release 12.3 for MX2010 3D Universal Edge Routers.
Command introduced in Junos OS Release 13.2 for MX104 3D Universal Edge Routers.
Command introduced in Junos OS Release 17.2 for MX2008 3D Universal Edge Routers.
Command introduced in Junos OS Release 17.2 for vMX on NFX250 Network Services
Platform.
Description For routers or switches that have a display on the craft interface, show the messages
that are currently displayed. On all routers except for the M20 router, you must enter this
command on the master Routing Engine.
Options none—(TX Matrix, TX Matrix Plus routers, MX104, MX2010, MX2020, and MX2008 routers,
and ACX Series routers only) On a TX Matrix router, show messages that are currently
1865Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
