vlan-id (Bridge Domain in ACX Series)
Syntax vlan-id (none | number);
Hierarchy Level [edit bridge-domains bridge-domain-name],
Release Information Statement introduced in Junos OS Release 12.3X52 for ACX Series routers.
Description Specify a VLAN identifier (VID) to include in the packets sent to and from the bridge
domain.
Options number—A valid VLAN identifier. If you configure multiple bridge domains with a valid
VLAN identifier, you must specify a unique VLAN identifier for each domain.
none—Specify to enable shared VLAN learning or to send untagged frames over VPLS
VT interfaces.
NOTE: Multichassis link aggregation (MC-LAG) does not support the none
option with the vlan-id statement with bridge domains.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Configuring a Bridge Domain
• bridge-domains
Copyright © 2017, Juniper Networks, Inc.1774
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
