clear oam ethernet connectivity-fault-management sla-iterator-statistics
Syntax clear oam ethernet connectivity-fault-management sla-iterator-statistics
maintenance-association maintenance-association-name
maintenance-domain maintenance-domain-name
<local-mep local-mep-id>
<remote-mep remote-mep-id>
sla-iterator sla-iterator
Release Information Command introduced in Junos OS Release 11.4 for EX Series switches.
Command introduced in Junos OS Release 13.2 for MX Series routers.
Description Clear Ethernet Operation, Administration, and Maintenance (OAM) service-level
agreement (SLA) iterator statistics. For MX Series routers, clear the SLA iterator statistics
and proactive Ethernet synthetic loss measurement (ETH-SLM) statistics.
Options maintenance-association maintenance-association-name—Name of the maintenance
association.
maintenance-domain maintenance-domain-name—Name of the maintenance domain.
local-mep local-mep-id—(Optional) Identifier of the local MEP.
remote-mep remote-mep-id—(Optional) Identifier of the remote MEP.
sla-iterator sla-iterator— Name of the SLA iterator profile.
Required Privilege
Level
view
List of Sample Output clear oam ethernet connectivity-fault-management sla-iterator-statistics on page1787
Output Fields When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear oam ethernet connectivity-fault
-management sla-iterator- statistics
user@switch> clear oam ethernet connectivity-fault-management sla-iterator-statistics
maintenance-domain md1 maintenance-association ma1 local-mep 1 remote-mep 2 sla-iterator
i1
Iterator statistics entries cleared
1787Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
