To Next Page

To Previous Page

Documentation

Understanding IGMP Snooping on page 473•

• Host-Side Interfaces and IGMP Snooping Proxy Mode on page 477

• Multicast-Router Interfaces and IGMP Snooping Proxy Mode on page 476

Configuring IGMP Snooping Trace Operations

Tracing operations record detailed messages about the operation of routing protocols,

such as the various types of routing protocol packets sent and received, and routing policy

actions. You can specify which trace operations are logged by including specific tracing

flags. The following table describes the flags that you can include.

DescriptionFlag

Trace all operations.all

Trace notifications.client-notification

Trace general flow.general

Trace group operations.group

Trace host notifications.host-notification

Trace leave group messages (IGMPv2 only).leave

Trace normal events.normal

Trace all IGMP packets.packets

Trace policy processing.policy

Trace IGMP membership query messages.query

Trace membership report messages.report

Trace routing information.route

Trace state transitions.state

Trace routing protocol task processing.task

Trace timer processing.timer

You can configure tracing operations for IGMP snooping globally or in a routing instance.

The following example shows the global configuration.

ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Configuration Guide

Other manuals for Juniper ACX2000