Juniper ACX2000

Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Enabling Graceful Restart
• Configuring Routing Protocols Graceful Restart
• Configuring Graceful Restart for MPLS-Related Protocols
• Configuring VPN Graceful Restart
• Configuring Logical System Graceful Restart
• Configuring Graceful Restart for QFabric Systems
grant-duration
Syntax grant-duration interval
Hierarchy Level [edit protocols ptp slave]
Description Specify the grant duration value. When unicast-negotiation is enabled, the local PTP
slave requests announce, synchronization, and delay-response messages from the master.
In each request, the slave asks for the packets to be sent at a specified rate and the slave
provides a duration for which the rate is valid. The grant-duration value is specified in
seconds. The default grant duration is 3600 seconds or 1 hour.
Options interval—The grant interval value for the announce messages.
Range: 60 through 7200 seconds
Default: 300 seconds
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• External Clock Synchronization Overview for ACX Series Routers on page 226
• Configuring External Clock Synchronization for ACX Series Routers on page 228
• Synchronous Ethernet Overview
Copyright © 2017, Juniper Networks, Inc.1544
ACX Series Universal Access Router Configuration Guide