test-profile (RFC 2544 Benchmarking)
Syntax test-profile profile-name;
Hierarchy Level [edit services rpm rfc2544-benchmarking tests test-name test-name]
[edit services rpm rfc2544-benchmarking profiles]
Release Information Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Description Specify the name of the test profile to be associated with a particular test name. This
parameter is required when the test mode is configured as initiate-and-terminate. This
parameter is disregarded when the test mode is configured as reflection. A reflection
service does not use the parameters specified in the test profile.
Options profile-name—Name of the test profile. The name can be up 32 characters in length. The
name must start with a letter. Allowed characters are [a-zA-Z0-9_]
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• RFC 2544-Based Benchmarking Tests Overview on page 1335
• Configuring RFC 2544-Based Benchmarking Tests on page 1341
• rfc2544-benchmarking on page 1698
1747Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
