show dhcp relay statistics
Syntax show dhcp relay statistics
<bulk-leasequery-connections>
<logical-system logical-system-name>
<routing-instance routing-instance-name>
Syntax Syntax for EX Series switches:
show dhcp relay statistics
<routing-instance routing-instance-name>
Release Information Command introduced in Junos OS Release 8.3.
Command introduced in Junos OS Release 12.1 for EX Series switches.
Command introduced in Junos OS Release 12.1X48R3 for PTX Series Packet Transport
Routers.
bulk-leasequery-connections option introduced in Junos OS Release 16.1.
Description Display Dynamic Host Configuration Protocol (DHCP) relay statistics.
Options bulk-leasequery-connections—(Optional) Display information about bulk leasequery
operations.
logical-system logical-system-name—(On routers only) (Optional) Perform this operation
on the specified logical system. If you do not specify a logical system name, statistics
are displayed for the default logical system.
routing-instance routing-instance-name—(Optional) Perform this operation on the
specified routing instance. If you do not specify a routing instance name, statistics
are displayed for the default routing instance.
Required Privilege
Level
view
Related
Documentation
clear dhcp relay statistics on page 1789•
List of Sample Output show dhcp relay statistics on page 2453
show dhcp relay statistics bulk-leasequery-connections on page 2454
Output Fields Table 139 on page 2452 lists the output fields for the show dhcp relaystatistics command.
Output fields are listed in the approximate order in which they appear.
2451Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
