transport ipv4 (PTP Unicast Master and Slave Interface)
Syntax transport ipv4;
Hierarchy Level [edit protocols ptp slave interface interface-name unicast-mode],
[edit protocols ptp master interface interface-name unicast-mode]
Release Information Statement introduced in Junos OS Release 12.2.
Statement introduced in Junos OS Release 12.3 for the master interface.
Statement introduced in Junos OS Release 17.3 for the QFX Series.
Description Configure the encapsulation type for Precision Time Protocol (PTP) packet transport.
Currently, IPv4 is the only supported encapsulation type for PTP.
NOTE: This attribute is mandatory in the configuration of a master or a slave
clock.
Options ipv4—Encapsulation for PTP packet transport.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• IEEE 1588v2 PTP Boundary Clock Overview on page 234
• Configuring Precision Time Protocol Clocking on page 243
• Configuring a PTP Master Boundary Clock on page 244
• Configuring a PTP Slave Clock on page 254
• Example: Configuring a PTP Boundary Clock With Unicast Negotiation on page 250
• Example: Configuring a PTP Boundary Clock on page 248
1761Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
