autoinstallation (ACX Series)
Syntax autoinstallation {
delete-upon-commit;
continue-network-mode;
configuration-servers {
url;
}
interfaces {
interface-name {
bootp;
rarp;
}
}
}
Hierarchy Level [edit system]
Release Information Statement introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
continue-network-mode option introduced in Junos OS Release 12.3X53 for ACX Series
Universal Access Routers.
Description (ACX Series routers). Download a configuration file automatically from an FTP, Hypertext
Transfer Protocol (HTTP), or Trivial FTP (TFTP) server. When you power on a router or
switch configured for autoinstallation, it requests an IP address from a Dynamic Host
Configuration Protocol (DHCP) server. Once the router or switch has an address, it sends
a request to a configuration server and downloads and installs a configuration.
Options The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Related
Documentation
• ACX Series Autoinstallation Overview on page 75
• Before You Begin Autoinstallation on an ACX Series Universal Access Router on page 77
• Autoinstallation Configuration of ACX Series Universal Access Routers on page 78
• USB Autoinstallation on ACX Series Routers on page 80
• Verifying Autoinstallation on ACX Series Universal Access Routers on page 79
• show system autoinstallation status on page 3178
• Upgrading Software by Using Automatic Software Download
• configuration-servers
• idle-timeout
1443Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
