Juniper ACX2000

flow-map
Syntax flow-map flow-map-name {
bandwidth (bps | adaptive);
forwarding-cache {
timeout (never non-discard-entry-only | minutes);
}
policy [ policy-names ];
redundant-sources [ addresses ];
}
Hierarchy Level [edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options multicast],
[edit logical-systems logical-system-name routing-options multicast],
[edit routing-instances routing-instance-name routing-options multicast],
[edit routing-options multicast]
Release Information Statement introduced in Junos OS Release 8.2.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 11.3 for the QFX Series.
Description Configure multicast flow maps.
Options flow-map-name—Name of the flow-map.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Example: Configuring a Multicast Flow Map
Copyright © 2017, Juniper Networks, Inc.1526
ACX Series Universal Access Router Configuration Guide