show interfaces (ATM)
Syntax show interfaces at-fpc/pic/port
<brief | detail | extensive | terse>
<descriptions>
<media>
<snmp-index snmp-index>
<statistics>
Release Information Command introduced before Junos OS Release 7.4.
Description (M Series and T Series routers only) Display status information about the specified ATM
interface.
Options at-fpc/pic/port—Display standard information about the specified ATM interface.
brief | detail | extensive | terse—(Optional) Display the specified level of output.
descriptions—(Optional) Display interface description strings.
media—(Optional) Display media-specific information about network interfaces.
snmp-index snmp-index—(Optional) Display the SNMP index of the interface.
statistics—(Optional) Display static interface statistics.
Required Privilege
Level
view
List of Sample Output show interfaces (ATM, IMA Group) on page 2486
show interfaces extensive (ATM IMA Group) on page 2487
show interfaces (ATM1, SONET Mode) on page 2488
show interfaces brief (ATM1, SONET Mode) on page 2489
show interfaces detail (ATM1, SONET Mode) on page 2489
show interfaces extensive (ATM1, SONET Mode) on page 2490
show interfaces (ATM2, SDH Mode) on page 2492
show interfaces brief (ATM2, SDH Mode) on page 2493
show interfaces detail (ATM2, SDH Mode) on page 2494
show interfaces extensive (ATM2, SDH Mode) on page 2495
show interfaces (ATM2, SONET Mode) on page 2498
show interfaces brief (ATM2, SONET Mode) on page 2499
show interfaces detail (ATM2, SONET Mode) on page 2500
show interfaces extensive (ATM2, SONET Mode) on page 2502
Output Fields Table 144 on page 2472 lists the output fields for the show interfaces (ATM) command.
Output fields are listed in the approximate order in which they appear.
2471Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
