aggregate (Routing)
Syntax aggregate {
defaults {
... aggregate-options ...
}
route destination-prefix {
policy policy-name;
... aggregate-options ...
}
}
Hierarchy Level [edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options],
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options rib routing-table-name],
[edit logical-systems logical-system-name routing-options],
[edit logical-systems logical-system-name routing-options rib routing-table-name],
[edit routing-instances routing-instance-name routing-options],
[edit routing-instances routing-instance-name routing-options rib routing-table-name],
[edit routing-options],
[edit routing-options rib routing-table-name]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 11.3 for the QFX Series.
Statement introduced in Junos OS Release 12.3 for ACX Series routers.
Statement introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Description Configure aggregate routes.
Options aggregate-options—Additional information about aggregate routes that is included with
the route when it is installed in the routing table. Specify zero or more of the following
options in aggregate-options. Each option is explained separately.
• active(— Removes inactive routes from the forwarding table.
• passive— Retains inactive routes in the forwarding table.
• as-path <as-path> <origin (egp | igp | incomplete)> <atomic-aggregate>
<aggregator as-number ip-address>;
• (brief | full);
• community [ community-ids ];
• discard;
• (metric | metric2 | metric3 | metric4) value <type type>;
• (preference | preference2 | color | color2) preference <type type>;
• tag metric type number;
Copyright © 2017, Juniper Networks, Inc.1420
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
