delete-upon-commit (ACX Series)
Syntax delete-upon-commit {
Hierarchy Level [edit system autoinstallation]
Release Information Statement introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Description Specify that during the subsequent commit operation of configuration settings (after
the autoinstallation process successfully retrieves, installs, and commits the
configuration), the autoinstallation configuration parameters are removed from the
router. Removal of the autoinstallation parameters and statements from the committed
configuration on the router ensures that the router does not attempt to perform an
autoinstallation process when it is powered on the next time. Although you can optionally
specify the interfaces to perform autoinstallation or configuration servers from which
the files are to be downloaded, you must include the delete-upon-commit statement to
prevent the router from entering a recursive loop and repeatedly performing an
autoinstallation every time it is powered on.
Required Privilege
Level
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Related
Documentation
• ACX Series Autoinstallation Overview on page 75
• Before You Begin Autoinstallation on an ACX Series Universal Access Router on page 77
• configuration-servers
• idle-timeout
1475Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
