Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• dhcp-relay on page 1491
• overrides on page 1647
domain-id
Syntax domain-id domain-id;
Hierarchy Level [edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3)],
[edit routing-instances routing-instance-name protocols (ospf | ospf3)]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Description Specify a domain ID for a route. The domain ID identifies the OSPF domain from which
the route originated.
Options domain-id—You can specify either an IP address or an IP address and a local identifier
using the following format: ip-address:local-identifier. If you do not specify a local
identifier with the IP address, the identifier is assumed to have a value of 0.
Default: If the router ID is not configured in the routing instance, the router ID is derived
from an interface address belonging to the routing instance.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Configuring an OSPF Domain ID on page 835
Copyright © 2017, Juniper Networks, Inc.1494
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
