Juniper ACX2000

test interface t1-bert-stop
Syntax test interface t1-bert-stop interface-name
Release Information Command introduced before Junos OS Release 7.4.
Description Stop a bit error rate test (BERT) on a T1 interface.
Options interface-name—Interface name: t1-interface-name fpc/pic/port or ct1-fpc/pic/port
<:channel>
Required Privilege
Level
view
Related
Documentation
test interface t1-bert-start on page 3209•
• test interface e1-bert-start on page 3207
• test interface e1-bert-stop on page 3208
List of Sample Output test interface t1-bert-stop on page 3210
Output Fields To display the results of the BERT, use the show interfaces extensive command.
Sample Output
test interface t1-bert-stop
user@host> test interface t1-bert-stop t1-1/0/0
Copyright © 2017, Juniper Networks, Inc.3210
ACX Series Universal Access Router Configuration Guide