show route inactive-path
List of Syntax Syntax on page 3065
Syntax (EX Series Switches) on page 3065
Syntax show route inactive-path
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
Syntax (EX Series
Switches)
show route inactive-path
<brief | detail | extensive | terse>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description Display routes for destinations that have no active route. An inactive route is a route that
was not selected as the best path.
Options none—Display all inactive routes.
brief | detail | extensive | terse—(Optional) Display the specified level of output. If you
do not specify a level of output, the system defaults to brief.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
Required Privilege
Level
view
Related
Documentation
show route active-path on page 2972•
List of Sample Output show route inactive-path on page 3065
show route inactive-path detail on page 3066
show route inactive-path extensive on page 3067
show route inactive-path terse on page 3067
Output Fields For information about output fields, see the output field tables for the show route
command, the show route detail command, the show route extensive command, or the
show route terse command.
Sample Output
show route inactive-path
user@host> show route inactive-path
inet.0: 25 destinations, 26 routes (24 active, 0 holddown, 1 hidden)
3065Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
