Juniper ACX2000

show ospf3 database
List of Syntax Syntax on page 2823
Syntax (EX Series Switches and QFX Series) on page 2823
Syntax show ospf3 database
<brief | detail | extensive | summary>
<advertising-router (address | self)>
<area area-id>
<external>
<instance instance-name>
<inter-area-prefix>
<inter-area-router>
<intra-area-prefix>
<link>
<link-local>
<logical-system (all | logical-system-name)>
<lsa-id lsa-id>
<network>
<nssa>
<realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)>
<router>
Syntax (EX Series
Switches and QFX
Series)
show ospf3 database
<brief | detail | extensive | summary>
<advertising-router (address | self)>
<area area-id>
<external>
<instance instance-name>
<inter-area-prefix>
<inter-area-router>
<intra-area-prefix>
<link>
<link-local>
<lsa-id lsa-id>
<network>
<nssa>
<router>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
realm option introduced in Junos OS Release 9.2.
advertising-router (address | self) option introduced in Junos Relase 9.5.
advertising-router (address | self) option introduced in Junos OS Release 9.5 for EX Series
switches.
Command introduced in Junos OS Release 11.3 for the QFX Series.
Description Display the entries in the OSPF version 3 (OSPFv3) link-state database, which contains
data about link-state advertisement (LSA) packets.
Options none—Display standard information about all entries in the OSPFv3 link-state database.
2823Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands