brief | detail | extensive | summary—(Optional) Display the specified level of output.
advertising-router (address | self)—(Optional) Display the LSAs advertised either by a
particular routing device or by this routing device.
area area-id—(Optional) Display the LSAs in a particular area.
external—(Optional) Display external LSAs.
instance instance-name—(Optional) Display all OSPF database information under the
named routing instance.
inter-area-prefix—(Optional) Display information about interarea-prefix LSAs.
inter-area-router—(Optional) Display information about interarea-router LSAs.
intra-area-prefix—(Optional) Display information about intra-area-prefix LSAs.
link—(Optional) Display information about link LSAs.
link-local—(Optional) Display information about link-local LSAs.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
lsa-id lsa-id—(Optional) Display the LSA with the specified LSA identifier.
network—(Optional) Display information about network LSAs.
nssa—(Optional) Display information about not-so-stubby area (NSSA) LSAs.
realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)—(Optional) Display information
about the specified OSPFv3 realm, or address family. Use the realm option to specify
an address family other than IPv6 unicast, which is the default.
router—(Optional) Display information about router LSAs.
Required Privilege
Level
view
Related
Documentation
clear (ospf | ospf3) database•
List of Sample Output show ospf3 database brief on page 2829
show ospf3 database extensive on page 2830
show ospf3 database summary on page 2832
Output Fields Table 185 on page 2825 lists the output fields for the show ospf3 database command.
Output fields are listed in the approximate order in which they appear.
Copyright © 2017, Juniper Networks, Inc.2824
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
