Juniper ACX2000

framing (E1 Options for BITS Interfaces)
Syntax framing (g704 | g704-no-cro4);
Hierarchy Level [edit chassis synchronization interfaces bits signal-type e1-options]
Release Information Statement introduced in Junos OS Release 12.3 for ACX Series Routers.
Description Configure the framing format for the building-integrated timing supply (BITS) interface
when the signal type is E1. Valid only when e1 is the signal-type configured at the [edit
chassis synchronization source interfaces interface-name bits signal-type].
Options g704—G.704 framing format for E1 interfaces.
g704-no-crc4—G.704 framing with no cyclic redundancy check 4 (CRC4) for E1 interfaces.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• External Clock Synchronization Overview for ACX Series Routers on page 226
• Configuring External Clock Synchronization for ACX Series Routers on page 228
• Synchronous Ethernet Overview
• show chassis synchronization on page 2386
1533Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements