tests (RFC 2544 Benchmarking)
Syntax tests {
test-name test-name {
test-interface interface-name;
mode reflect;
family (inet | ccc);
destination-ipv4-address address;
destination-udp-port port-number;
source-ipv4-address address;
source-udp-port port-number;
direction (egress | ingress);
}
}
Hierarchy Level [edit services rpm rfc2544-benchmarking]
Release Information Statement introduced in Junos OS Release 13.3 for MX104 3D Universal Edge routers.
Description Specify the attributes of the test iteration, such as the address family (type of service,
IPv4 or Ethernet), the logical interface, test duration, and test packet size, that are used
for a benchmarking test to be run. The test name combined with the test profile represent
a single real-time performance monitoring (RPM) configuration instance.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Configuring an RFC 2544-Based Benchmarking Test
• RFC2544-Based Benchmarking Tests Overview
• rfc2544-benchmarking on page 1698
1749Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
