show isis database
List of Syntax Syntax on page 2677
Syntax (EX Series Switches and QFX Series) on page 2677
Syntax show isis database
<system-id>
<brief | detail | extensive>
<instance instance-name>
<level (1 | 2)>
<logical-system (all | logical-system-name)>
Syntax (EX Series
Switches and QFX
Series)
show isis database
<system-id>
<brief | detail | extensive>
<level (1 | 2)>
<instance instance-name>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 12.1 for the QFX Series.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Command introduced in Junos OS Release 15.1X53-D30 for the QFX10002 switch.
Description Display the entries in the Intermediate System-to-Intermediate System (IS-IS) link-state
database, which contains data about PDU packets.
Options none—Display standard information about IS-IS link-state database entries for all routing
instances.
system id—(Optional) Display IS-IS link-state database entries for the specified
intermediate system.
brief | detail | extensive—(Optional) Display the specified level of output.
instance instance-name—(Optional) Display IS-IS link-state database entries for the
specified routing instance.
level (1 | 2)—(Optional) Display IS-IS link-state database entries for the specified IS-IS
level.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
Required Privilege
Level
view
Related
Documentation
clear isis database•
2677Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
