Juniper ACX2000 Configuration Guide

show (ospf | ospf3) route
List of Syntax Syntax on page 2857
Syntax (EX Series Switch and QFX Series) on page 2857
Syntax show (ospf | ospf3) route
<brief | detail | extensive>
<abr | asbr | extern | inter | intra>
<destination>
<instance (default | ipv4-multicast | instance-name)>
<logical-system (default | ipv4-multicast | logical-system-name)>
<network>
<no-backup-coverage>
<realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)>
<router>
<topology (default | ipv4-multicast | topology-name)>
<transit>
Syntax (EX Series
Switch and QFX
Series)
show (ospf | ospf3) route
<brief | detail | extensive>
<abr | asbr | extern | inter | intra>
<destination>
<instance instance-name
<network>
<no-backup-coverage>
<router>
<topology (default | ipv4-multicast | topology-name)>
<transit>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
topology option introduced in Junos OS Release 9.0.
realm option introduced in Junos OS Release 9.2.
Command introduced in Junos OS Release 11.3 for the QFX Series.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Description Display the entries in the Open Shortest Path First (OSPF) routing table.
Options none—Display standard information about all entries in the OSPF routing table for all
routing instances and all topologies.
destination—Display routes to the specified IP address (with optional destination prefix
length).
brief | detail | extensive—(Optional) Display the specified level of output.
abr—(Optional) Display routes to area border routers.
asbr—(Optional) Display routes to autonomous system border routers.
extern—(Optional) Display external routes.
2857Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English