Juniper ACX2000

route-distinguisher-id
Syntax route-distinguisher-id ip-address;
Hierarchy Level [edit logical-systems logical-system-name routing-options],
[edit routing-options]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Description Automatically assign a route distinguisher to the routing instance.
If you configure the route-distinguisher statement in addition to the route-distinguisher-id
statement, the value configured for route-distinguisher supersedes the value generated
from route-distinguisher-id.
NOTE: To avoid a conflict in the two route distinguisher values, it is
recommended to ensure that the first half of the route distinguisher obtained
by configuring the route-distinguisher statement is different from the first half
of the route distinguisher obtained by configuring the route-distinguisher-id
statement.
Options ip-address—Address for routing instance.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Example: Configuring BGP Route Target Filtering for VPNs
• Configuring Routing Instances on PE Routers in VPNs
1703Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements