Juniper ACX2000

e1-options
Syntax e1-options {
bert-algorithm algorithm;
bert-error-rate rate;
bert-period seconds;
fcs (16 | 32);
framing (g704 | g704-no-crc4 | unframed);
idle-cycle-flag (flags | ones);
invert-data;
loopback (local | remote);
start-end-flag (filler | shared);
timeslots time-slot-range;
}
Hierarchy Level [edit interfaces interface-name]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 12.2 for the ACX Series Universal Access
Routers.
Description Configure E1-specific physical interface properties.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Channelized E1 IQ and IQE Interfaces Overview
• Channelized STM1 Interfaces Overview
• E1 Interfaces Overview
• T1 Interfaces Overview
1503Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements