ieee-802.1 (Classifier on Physical Interface)
Syntax ieee-802.1 (classifier-name | default) vlan-tag (inner | outer );
Hierarchy Level [edit class-of-service interfaces interface-nameclassifiers]
Release Information Statement introduced in Junos OS Release 12.2 for the ACX Series Universal Access
routers.
Description For ACX Series Universal Access routers and EX Series switches, map the ieee-802.1p
field of the incoming packet to the forwarding class and packet loss priority based on
the specified 802.1p classifier. In the case of double tagged packets, you can configure
whether to use the 802.1p of the outer or inner VLAN tag.
Options vlan-tag inner—In the case of double tagged packets, classify based on the 802.1p of
the inner VLAN tag.
vlan-tag outer—Classify based on the 802.1p of the outermost VLAN tag.
classifier-name—Name of the previously defined ieee-802.1p behavior aggregate classifier.
default—Default ieee-802.1p behavior aggregate classifier.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
ieee-802.1 (Rewrite Rules on Physical Interface)
Syntax ieee-802.1 (rewrite-name | default) ;
Hierarchy Level [edit class-of-service interfaces interface-name ]rewrite-rules
Release Information Statement introduced in Junos OS Release 12.2 for the ACX Series Universal Access
routers.
Description Apply an IEEE-802.1 rewrite rule.
Options rewrite-name—Name of a rewrite-rules mapping configured at the [edit class-of-service
rewrite-rules ieee-802.1] hierarchy level.
default—The default mapping.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Copyright © 2017, Juniper Networks, Inc.1554
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
