NOTE: When MAC learning is disabled for a VPLS routing instance, traffic is
not load-balanced and only one of the equal-cost next hops is used.
Default MAC learning is enabled.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Configuring EVPN Routing Instances
• Configuring EVPN Routing Instances on EX9200 Switches
• Layer 2 Learning and Forwarding for Bridge Domains Overview
• Layer 2 Learning and Forwarding for VLANs Overview
• Layer 2 Learning and Forwarding for Bridge Domains Functioning as Switches with Layer
2 Trunk Ports
• Understanding Bridging and VLANs on EX Series Switches
• Understanding Q-in-Q Tunneling on EX Series Switches
no-local-switching
Syntax no-local-switching;
Hierarchy Level [edit bridge-domains bridge-domain-name]
Release Information Statement introduced in Junos OS Release 12.3X54 for ACX Series routers.
Description Prevent CE devices from communicating directly with each other. If the no-local-switching
statement is configured, frames arriving on a CE interface are sent to a core-facing
interfaces only.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
1637Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
