interfaces bits (Chassis Synchronization)
Syntax interfaces bits {
signal-type (2048KHZ | e1 | t1) {
e1-options {
framing (g704 | g704-no-cro4);
}
t1-options {
framing (esf | sf);
}
}
}
Hierarchy Level [edit chassis synchronization ]
Release Information Statement introduced in Junos OS Release 12.3 for ACX Series Routers.
Description Configure the parameters of the building-integrated timing supply (BITS) interface.
NOTE: bits is not supported on the ACX1000 router.
Options The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• External Clock Synchronization Overview for ACX Series Routers on page 226
• Configuring External Clock Synchronization for ACX Series Routers on page 228
• Synchronous Ethernet Overview
• show chassis synchronization on page 2386
1579Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
