Juniper ACX2000

ieee-802.1 (rewrite-name | default) vlan-tag (outer | outer-and-inner);
inet-precedence (rewrite-name | default);
}
scheduler-map map-name;
shaping-rate rate;
translation-table (to-dscp-from-dscp | to-dscp-ipv6-from-dscp-ipv6| to-exp-from-exp
| to-inet-precedence-from-inet-precedence) table-name;
}
}
interface-set interface-set-name {
excess-bandwidth-share;
internal-node;
output-traffic-control-profile profile-name;
output-traffic-control-profile-remaining profile-name;
}
}
Hierarchy Level [edit class-of-service]
Release Information Statement introduced before Junos OS Release 7.4.
Interface-set level added in Junos OS Release 8.5.
Description Configure interface-specific CoS properties for incoming packets.
Options The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Understanding How Behavior Aggregate Classifiers Prioritize Trusted Traffic on page 950
• Configuring Rewrite Rules
Copyright © 2017, Juniper Networks, Inc.1578
ACX Series Universal Access Router Configuration Guide