framing
Syntax framing (t1 | e1);
Hierarchy Level [edit chassis fpc slot-number pic pic-number],
Release Information Statement introduced in Junos OS Release 12.2 for ACX Series routers.
Description When you set the framing type, you set the emulation mode so that the built-in
channelized T1 and E1 interfaces can work in either T1 or E1 mode. This configuration is
at the PIC level, so all ports operate as either T1 interfaces or E1 interfaces. A mix of T1
and E1 interfaces is not supported. By default all the ports operate as T1 interfaces.
Default t1
Options e1—Framing for E1 interfaces.
t1—Framing for T1 interfaces.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Setting the T1/E1 Emulation Mode on page 192
• SAToP Emulation on T1 and E1 Interfaces Overview on page 110
• Inverse Multiplexing for ATM (IMA) Overview on page 184
Copyright © 2017, Juniper Networks, Inc.1532
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
