show filter aggregate policer
Syntax show filter aggregate policer aggregate-policer-name
Release Information Command introduced in Junos OS Release 12.3X54 for ACX Series Routers.
Description Display the various policer instances referring to a given aggregate-policer parent
template. The command also displays warnings if the configured bandwidth/burst-size
does not confirm to the guidelines for the burst size and information or burst rate
parameters as defined for the three modes of hierarchical or aggregate policers. You can
perform a basic evaluation of whether the aggregate policer conforms to the requirements
of a given aggregate-policing hierarchy.
Options aggregate-policer-name—Name of the aggregate policer previously configured.
Required Privilege
Level
view
Related
Documentation
Hierarchical Policers on ACX Series Routers Overview on page 920•
• Guidelines for Configuring Hierarchical Policers on ACX Routers on page 921
• Hierarchical Policer Modes on page 923
• Processing of Hierarchical Policers on page 928
• Actions Performed for Hierarchical Policers on page 929
• Configuring Aggregate Parent and Child Policers on ACX Series Routers on page 931
List of Sample Output show filter aggregate-policer policer-name (With Warnings) on page 2467
show filter aggregate-policer policer-name (With a Fully Valid
Configuration) on page 2468
Output Fields Table 142 on page 2466 lists the output fields for the show filter aggregate policer command.
Output fields are listed in the approximate order in which they appear.
Table 142: show filter aggregate policer Output Fields
Field DescriptionField Name
Details of the child policers attached with the parent policerCHILDREN
Serial number that indicates the child policer associated with the
parent policer
Serial number
Name of the child policerpolicer name
Committed burst size in kilobytesCBS
Copyright © 2017, Juniper Networks, Inc.2466
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
