Juniper ACX2000

priority (Chassis Synchronization Source)
Syntax priority number;
Hierarchy Level [edit chassis synchronization source (bits | gps)]
[edit chassis synchronization source interfaces]
Release Information Statement introduced in Junos OS Release 12.2 for ACX Series Routers.
Description Configure a priority level for the interface specified as a candidate source. When not
specified, gps has higher default priority than bits, and bits has higher default priority than
other Gigabit Ethernet, 10-Gigabit Ethernet, T1, or E1 clock sources, which have the lowest
default priority.
Options number—Priority level between 1 and 5.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• External Clock Synchronization Overview for ACX Series Routers on page 226
• Configuring External Clock Synchronization for ACX Series Routers on page 228
• Synchronous Ethernet Overview
• show chassis synchronization on page 2386
Copyright © 2017, Juniper Networks, Inc.1684
ACX Series Universal Access Router Configuration Guide