label-switched-path-template (Multicast)
Syntax label-switched-path-template {
(default-template | lsp-template-name);
}
Hierarchy Level [edit logical-systems logical-system-name routing-instances routing-instance-name
provider-tunnel rsvp-te],
[edit logical-systems logical-system-name routing-instances routing-instance-name
provider-tunnel ingress-replication label-switched-path],
[edit logical-systems logical-system-name routing-instances routing-instance-name
provider-tunnel selective group address source source-address rsvp-te],
[edit logical-systems logical-system-name routing-options dynamic-tunnels tunnel-name
rsvp-te entry-name],
[edit protocols mvpn inter-region-segmented template template-name region region-name
ingress-replication label-switched-path],
[edit protocols mvpn inter-region-segmented template template-name region region-name
rsvpe-te],
[edit protocols mvpn inter-region-template template template-name all-regions
ingress-replication label-switched-path],
[edit protocols mvpn inter-region-template template template-name all-regions rsvp-te],
[edit routing-instances routing-instance-name provider-tunnel ingress-replication
label-switched-path],
[edit routing-instances routing-instance-name provider-tunnel rsvp-te],
[edit routing-instances routing-instance-name provider-tunnel selective group address source
source-address rsvp-te],
[edit routing-options dynamic-tunnels tunnel-name rsvp-te entry-name]
Release Information Statement introduced in Junos OS Release 8.5.
Description Specify the LSP template. An LSP template is used as the basis for other dynamically
generated LSPs. This feature can be used for a number of applications, including
point-to-multipoint LSPs, flooding VPLS traffic, configuring ingress replication for IP
multicast using MBGP MVPNs, and to enable RSVP automatic mesh. There is no default
setting for the label-switched-path-template statement, so you must configure either
the default-template using the default-template option, or you must specify the name
of your preconfigured LSP template.
Options default-template—Specify that the default LSP template be used for the dynamically
generated LSPs.
lsp-template-name—Specify the name of an LSP to be used as a template for the
dynamically generated LSPs.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
Example: Configuring Ingress Replication for IP Multicast Using MBGP MVPNs•
Copyright © 2017, Juniper Networks, Inc.1586
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
